Meter Test Calculator

KH CONFIGURATION

IMP (imp/kWh)

KH (Auto)

STD Meter KH

Light Load (L.L)

REV

AS Found (Actual Rev)

STD Rev 0.00

Percentage (%) —

Error (%) —

⏳ AWAITING DATA

STD Rev = (KH × REV × 100) ÷ STD KH | Error = (STD Rev ÷ AS Found × 100) − 100

Full Load (F.L)

REV

AS Found (Actual Rev)

STD Rev 0.00

Percentage (%) —

Error (%) —

⏳ AWAITING DATA

STD Rev = (KH × REV × 100) ÷ STD KH | Error = (STD Rev ÷ AS Found × 100) − 100

Light Load (L.L)

REV

Load Watt

STD Time (s)

Actual Time (s)

Error (%) 0.00

⏳ AWAITING DATA

STD Time = (REV × KH × 3600) ÷ Load Watt

Full Load (F.L)

REV

Load Watt

STD Time (s)

Actual Time (s)

Error (%) 0.00

⏳ AWAITING DATA

STD Time = (REV × KH × 3600) ÷ Load Watt

STOPWATCH

Status

Target Load

00:00.00

0.0 sec

HOW IT WORKS

1 Select load type — Light Load (L.L) or Full Load (F.L)
2 Press START when meter disc begins rotating
3 Press STOP after the desired number of REVs
4 Time auto-fills into the Time Wise tab automatically
5 Switch to Time Wise tab to view Error %

0 / 0 0.00 s

Starting camera…

CAMERA OFF

STD (s)—

ACTUAL (s)—

ERROR (%)—

⏳ AWAITING DATA

TEST SETTINGS

Load

REV (pulses)

Load Watt

Start delay (steady your hand)

Pulse type

Sensitivity (lower = more sensitive)

Box size

Min gap between pulses (ms)

Tap the video to move the box onto the LED / disc mark. Dashed line = detection threshold.

HOW IT WORKS

1 Set IMP at the top, then Load, REV and Load Watt above
2 Aim the camera at the meter and tap the video to put the box on the LED
3 Press START (no scrolling needed) — after the delay, the timer begins on the first pulse
4 After the set REV count it beeps, stops, and shows the error